[Review&QnA] Screw-in Lens Hood Shade for Nikon NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens on Nikon Z50 Zfc Z fc Replace Nikon HN-40 Lens Hood

Electronics > Camera & Photo > Accessories > Lens Accessories > Lens Hoods
	[Review&QnA] Screw-in Lens Hood Shade for Nikon NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens on Nikon Z50 Zfc Z fc Replace Nikon HN-40 Lens Hood GotoProduct About this item Compatibility: The screw-in lens hood is designed for NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens on Z50. Replacement: Replace HN-40 lens hood. Made of high quality ABS material, durable and lightweight.*Note: There is an option for the metal one, please check carefully before purchasing. Flexibility: Allows you to put on a Ф46mm filter and Ф46mm lens cap. Professional Design: non-glare matte finish on the inside to further prevent or limit lens flare. no vignetting with the hood on. Protection: To prevent stray light from entering the lens. And protect the lens from impact.
Review
★★★★★ Better than original at lower cost Size: Replace Nikon HN-40 for 16-50mm Lens | Verified Purchase Perfect. Fits the way it should. Metal construction vs Plastic for the Nikon ONE unit. Center pinch cap fits as it has threads to allow lens cap to fit. Much less expensive than the Nikon hood and made of better material.   ★★★★★ Perfect fit Size: Replace Nikon HB-90A for 50-250mm Lens | Verified Purchase Obviously a counterfeit product from China, but a huge savings compared to the actual product from Nikon. Strong and durable and fits perfect on my Nikon Z50   ★★★★★ Works as needed Size: Replace Nikon HN-40 for 16-50mm Lens | Verified Purchase I carry my cameras on black rapid straps and I use the lens hoods to prevent me from accidentally touching the front element of the lens. This works as needed for that purpose. Doesn’t stick out much, but is enough.   ★★★★★ Buy!! Size: Replace Nikon HB-90A for 50-250mm Lens | Verified Purchase Excellent quality and works very well on my Z50 mirrorless!   ★★★★★ Excellent. Strongly recommended if you want to turn a filter on the 16-50 Size: Replace Nikon HN-40 for 16-50mm Lens | Verified Purchase Best $10 I've spent on a photo accessory. Turning a polarizer on the the z 16-50 was very difficult before due to the small size; adding this hood makes using a filter on the 16-50 a real pleasure.   ★★★★★ Great lens hood! Size: Replace Nikon HN-40 for 16-50mm Lens | Verified Purchase This is a great lens hood for the kit lens for the Z50. Fits great and looks great and adds very little to the size.   ★★★★★ Precisely made to Nikon Z lenses. Size: Replace Nikon HB-90A for 50-250mm Lens | Verified Purchase Well made product and perfect fit for my Nikon Z. Great buy for the money. Highly recommended.   ★★★★★ Nikon Lens Hood - Delivered OVERNIGHT Within HOURS!! Size: Replace Nikon HB-90A for 50-250mm Lens | Verified Purchase I purchased this lens hood 4/24 around 11::00 P.M. It arrived 4/25 before 11:00 A.M. The quality is amazing but what’s more amazing is the service of the Vendor who shipped this product overnight from Lexington KY to New York NY. Talk about TOP QUALITY SERVICE!!!! #MagiCube is the greatest!! When shopping for Photography accessories on Amazon, these guys will be my first choice!!! THANK YOU!!   ★★★★★ It fits fine. Worthwhile to add to my lens. Size: Replace Nikon HN-40 for 16-50mm Lens | Verified Purchase It's a good. It fits. Provides a little more protection for the lens from glare. Doesn't get in my way taking out or putting in the bag. Nuff said.   ★★★★★ Great for off brand Size: Replace Nikon HB-90A for 50-250mm Lens | Verified Purchase I was a little worried about ordering this because I wasn’t sure it would fit but it fits perfectly on my Nikon z50. I haven’t had any issues with it.   See more reviews
Custom Questions & answers
Question: Will this hood fit the sony - 35mm f/1.8 fe wide-angle lens for sony e-mount - black model: sel35f18f filter size/thread size: 55mm? Answer: Sorry, this lens hood only can fit Nikon NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens   Question: Will fit the following? https://www.amazon.com/tamron-18-200mm-3-5-6-3-nikon-digital/dp/b013hxy21e/ref=pd_lpo_421_t_1/142-6870981-5325761?_encoding=ut Answer: I am not sure of the area mm of the 18-200. If it is 58mm (example) or the same as the hood it will fit. Nikon's site has a list of all the mm and what fits different ones. Sorry I couldn't help more.   Question: What is the rear screw mount size on this? will this hood screw onto a 46mm? Answer: Hi, the rear screw mount size is also 46mm. The hood is designed for Z50 46mm lens so we cannot make sure if it can fit other 46mm camera. Thank you!   Question: Will this fit. 50mm 1.8 lens for Nikon D3400? Answer: Hello, it's not fit the lens 50mm 1.8 for Nikon D3400. Thanks.   Question: What's lens diameter does this hood fit? Answer: The one I bought is for a 62mm thread. I’m sure they make them in many different sizes.   Question: Will it fit nikon d5100? Answer: Yes   See more questions