Question: | What would b the best device to get the hdmi from a pc to the sdi input on this device? |
Answer: | I replied to your other question. I don't think this device is going to work in the way you have it works. What kind of displays/TVs will you be sending the PC output to? |
|
Question: | I have two cameras to both send signal to one input on a Tricaster. Will this allow mw to do that? |
Answer: | No, this just takes a single SDI input and duplicates it to 8 SDI outputs. You need an SDI switcher, such as the Osprey SSR-42R unit. |
|
Question: | I am needing a distance of approximately 600 ft. is it possible with this device & 2 300ft 3g/6g sdi cables? what is the longest? |
Answer: | SDI cabling can run up to 100 meters or roughly 325 feet. |
|
Question: | Does it convert this sdi input to analog video output? or it just split the sdi into 8 sdi signals? |
Answer: | This unit accepts 1 SDI input and provides 8 identical SDI outputs, no conversions, no analog. Black Magic does make the #CONVMASA which is HD-SDI to Analog. |
|
Question: | Does this unit come with a power supply? |
Answer: | hi, YES this model included Power Supply. Thanks |
|
Question: | what is the cable distance(length that this amplifier will support? |
Answer: | SDI supports lengths of 330 feet which this amplifier does. I have actually had a 300 foot run to the amp and then a 310 foot run from that. |
|
Question: | Is this compatable with 4 moniters? |
Answer: | Yes, this unit accepts a single SDI video input, and converts to 8 SDI video outputs, so one could feed up to 8 SDI displays from this unit. Or are you possibly asking if compatible with 4K monitors, and missed typing the "K" ? |
|
Question: | cat6 cable to HDMI with 4k out put box |
Answer: | Not as it stands.. .
Device is SDI signal distributor, for use with SDI(co-axial ) cable . |
|
Question: | How many meter can it extend? |
Answer: | Good-quality SDI cables can run about 100 meters, so that is what you would get coming out of this device |
|
Question: | Will this carry audio coming from the original SDI as it splits it? |
Answer: | Yes, the SDI INPUT is sent to all OUTPUTS "as is" - what comes in is what goes out |
|
See more questions |
Comments
Post a Comment