[Review&QnA] HQMaster 45 Degree Tungsten Steel Lettering Blade Vinyl Cutter Blades for Roland Cutting Plotter Red Cap Pack Of 10
Office Products > Office Electronics > Printers & Accessories > Printer Parts & Accessories > Printer Cutters
[Review&QnA] HQMaster 45 Degree Tungsten Steel Lettering Blade Vinyl Cutter Blades for Roland Cutting Plotter Red Cap Pack Of 10
About this item
- Made from tungsten steel
- Degree: 45 degrees. Apply in reflective film, automotive film, self-adhesive paper or papers on the cutting plotter. please check the size before order.
- Total Length: 23.3mm diameter: 1.96mm
- Quantity: Pack of 10 assorted in a plastic storage case
- Vinyl Cutter Plotter Cutting Blades for mahogany, wood, PVC color board, MDF and other precision relief
- High quality and extra long life. No rust, antistatic.
- No peeling, blistering, rust problems.
- High hardness, greater strength, better abrasion resistance.
- Apply in reflective film, automotive film, self-adhesive paper or papers on the cutting plotter.
Reviews
★★★★★
Size: 45° | Verified Purchase
Great price! Cuts precisely!
These blades cut beautifully with my Cricut Maker. Some people have mentioned that the blades cut a little deeper than other blades, but I did not notice that happening with the Maker. First I cut standard copy paper to perform a test cut. I set the Cricut's material setting to "Copy Paper – 20 lb." The cut was clean as well as the correct depth. I then switched to 107 lb shimmer cardstock using a cut pressure of 350 with Multicut "Off" (only needing 1 pass). As you can see from the photo, the HQ Master blade cut the intricate trees and little birds beautifully. I am so happy with these blades I have already ordered more!
★★★★★
Size: 45° | Verified Purchase
Woah they are sharp!
These are GREAT! I had just finished cutting vinyl with my Cricut Air 2 and I guess my Cricut blade was pretty dull so the vinyl was impossible to weed. I decided to give these a try and re cut the vinyl, per the reviews I lowered my setting to between vinyl and iron on and it was so strong that it still cut through the carrier sheet. I'm super happy with the sharpness of the blade and hope these are long lasting so that I can save money over the branded blades. Don't hesitate your purchase!
★★★★★
Size: 45° | Verified Purchase
Buy these, not the more expensive one.
I thought for the price these might not last very long but I was wrong. They are as good as the Cricut ones I paid much much more for! I have used these blades exclusively in cutting out many vinyl items to decorate for vacation bible school and I love them!
★★★★★
Size: 45° | Verified Purchase
I used these HQ Master 45 degree blades in my ...
I used these HQ Master 45 degree blades in my Cricut machine and they worked very well to cut vinyl.
★★★★★
Size: 45° | Verified Purchase
Works well so far
After some calibration on my plotter, these blades (still on first one) perform as well if not better than the over priced ones I have been purchasing from my distributors. Well worth it!
★★★★★
Size: 45° | Verified Purchase
Don’t think twice about buying these great blades!
This is an unbelievably great bargain for these blades that work in our Roland vinyl cutter! The blades are working very well for us, no problems at all!
★★★★★
Size: 45° | Verified Purchase
Works AMAZING for my Cricut Explore Air 2!!
These are my go to for my Cricut Explore Air 2, They work so much better, pricing is better!! Highly recommend!!
★★★★★
Size: 45° | Verified Purchase
Good value. Great Price.
Best price I could find! These blades seem to be as good as the name brand. I am happy with this product.
★★★★★
Size: 45° | Verified Purchase
Us Cutter 871
Worked with my US Cutter MH 871. Will purchase again.
★★★★★
Size: 45° | Verified Purchase
Strong sharp blades for professional cutter
The blades came neatly packaged and well protected. I bought them for a US Cutter MH871. Have only used 1 blade for several projects and the blade still works like new.
Question & Answer
Question :
Will these blades work on my Uscutter Laserpoint 2 cutter?
Answer :
I'm pretty sure that they would...I actually have the USCutter MH 721 and these work nicely on it. Great price too! Highly recommend
Question :
has anyone tried these blades with brother scan and cut sdx125?
Answer :
I have not. I use these on my SC2 vinyl cutter
Question :
cricut joy?
Answer :
It will work in a cricut as I have one and use those blades!
Question :
Can these be used with the Brother Scanncut 2?
Answer :
I believe they use a blade with collar as in video
https://www.youtube.com/watch?v=4x_sN0DFkPg
Question :
Do they work in a cricut explore one?
Answer :
If I had to guess, I would say no. They will work with anything that uses a Roland blade.
Question :
Will these work on the Gerber Envision 375?
Answer :
I don't believe so - I just looked and my envision blades seem much smaller - unless this company sells envision compatable blades as well, if they do, I would try them! These work AWESOME on my roland versacamm, as good if not better than the ones I was paying $50 for! I also got 60 degree ones that work great too.
Question :
Will these work in a Roland BN-20?
Answer :
Not sure but they work with my Roland Versacamm
Question :
Do these work on a scan & cut machine?
Answer :
No they don’t work in scan N cut
Question :
Can I use it on my cricut machine?
Answer :
I have a "print shop" size vinyl cutter, (36" wide) and these blades fit my cutter fine. I have no idea if they will fit anything smaller.
Question :
Will these work in a Brother scam n Cut? Their blade cost is crazy!
Answer :
I don't have a Brother Scan and Cut but these blades work in the Cricut, Pazzles, Silhouette, and US Cutter machines I do have.
If you have a machine that you only need to replace the blade and not the entire housing these may fit. I didn't find them to be to expensive to order and give them a try.
Comments
Post a Comment