Question: | Does this cable have an active power line? (Pin 20) I'm trying to find a 19 pin cable, had a 20 pin and it was causing major issues with my PC |
Answer: | Looks like only 19 conductors, if that's what you're looking for. Check specs on startech site: https://www.startech.com/m/Cables/Audio-Video/DisplayPort/displayport-cable-10ft-certified~DISPLPORT10L |
|
Question: | Will this cable support without any performance issues the asus rog swift 27-inch 144hz g-sync gaming 3d monitor [pg278q] 1440p, 1ms rapid response ? |
Answer: | Yes. DISPLPORT15L is a DisplayPort 1.2 cable and Asus ROG Switch PG278Q uses a DisplayPort 1.2 connection, so DISPLPORT15L supports the full amount of bandwidth needed.
Sam, StarTech.com Support |
|
Question: | Will the 10 ft cable support 4K display @ 60 Hz? |
Answer: | No this 15' cable does not work at 4k@60. This question is under the wrong product |
|
Question: | Does this cable actually meet displayport 1.2? StarTech Website says yes, this page no. Anyone get the full bandwidth 21.6Gpbs? |
Answer: | The VESA website (www.displayport.org) reads that the product (3, 6 and 10 foot) is tested and certified at DP 1.2 specification. |
|
Question: | Can the 20ft dp cable support 1440p at 165Hz? |
Answer: | Unfortunately, no our DISPLPORT20L has a maximum resolution capability of up to 2560x1600 at 60 Hz.
Brian, StarTech.com Support |
|
Question: | Trying to use the 15ft at 3440 x 1440 but it's limiting to 50hz or 60hz. Even when I reduce the resolution to 1024 x 768 I can only select 50 or 60. |
Answer: | Look into your monitor and video card specifications to make sure they both support a frame rate higher than 60hz. Also, if you are using an NVIDIA card you should use the NVIDIA Control Panel to adjust video settings. Hope this helps. |
|
Question: | I have two monitors (Dell U3417@3440x1440 and Dell 2410@1920x1200) connected using MST. Will this work with a 35’ cable? |
Answer: | No, DISPLPORT35L supports a maximum resolution up to 1920x1200, and does not support DisplayPort 1.2 / MST.
Atha, StarTech.com Support |
|
Question: | Can this connect to a active converter to be plugged into my pc. my display has displayport. my pc doesn’t will it work ?? |
Answer: | I haven’t connected this cable to any converter but have no problem with standard DP port. I would assume it would work as the signal coming out of the DP converter is supposed to be standard just as if coming from an embedded DP port. |
|
Question: | Currently looking at the 3m variant of the wire. Can anyone confirm that this will run a 1440p 144hz(165hz) monitor with no flicker? |
Answer: | We typically recommend 3 to 6 foot cables for high refresh rate configurations. |
|
Question: | Will the 30ft cable work with a Oculus Rift S? |
Answer: | No, the DISPLPORT30L supports a maximum resolution and refresh rate of 2560x1600 at 60Hz. The Oculus Rift S requires more bandwidth than DisplayPort can natively support at 30 feet.
Matt, StarTech.com Support |
|
See more questions |
Comments
Post a Comment