[Review&QnA] Tegg 2PCS Flat Ribbon Cable 2.54mm Pitch 2 Row 10 Pin Female to Female Wires IDC Ribbon Connector 1m/ 3.3Ft
Electronics > Computers & Accessories > Computer Accessories & Peripherals > Cables & Accessories > Cables & Interconnects > Flat Ribbon Cables
[Review&QnA] Tegg 2PCS Flat Ribbon Cable 2.54mm Pitch 2 Row 10 Pin Female to Female Wires IDC Ribbon Connector 1m/ 3.3Ft
About this item
- Product name: Flat Ribbon Cable. Type: 2 Row 10 Pin.
- Cable long: 1m/ 39.4 Inches.Cable width: 12.5mm / 0.49 Inches.
- Pitch: 2.54mm . Package Content: 2PCS.
- Withstand voltage: 300 V.Temperature: 105 Degree Centigrade.
- Used for most Atmel AVR JTAG debugger, system programmer, Isp download, etc.
Reviews
★★★★★
Verified Purchase
Great for relocating 3D printer electronics
Worked flawlessly for extending the distance between the lcd display and the main board in my creality ender 5. I relocated the electronics enclosure to the rear of the machine and this cable did the trick with around 8 inches to spare. Well built and even replicates the cable alternating cable approach direction relative to the key on each end just like the factory cable. Only way it would be better is if it was sold in a quantity of one for half the price.
★★★★★
Verified Purchase
Ender 5 Display Location
I installed this on my Creality Ender 5 because the printer is located in a corner of my workbench that is partially obstructed by a storage shelf and the outer wall. This cable allowed me to move the control head display all the way around the front left of the printer so I can easily reach to adjust settings or start/stop prints. I also printed a box to mount the control head so it sits on my workbench without being concerned that it might get shorted out.
Note that this cable is not shielded and was getting some electromagnetic interference from the Ender and another 3d printer located next to the extended control head which causes the control head button to randomly click. This problem is especially worse when current is passed through to heat up the hotend or bed. I wrapped this ribbon cable with aluminum foil to help solve the clicking issue by blocking the EMI as suggested on an online forum. This happened also on the very short factory cable so it's not a fault of this cable but rather poor grounding and/or shielding on behalf of Creality.
★★★★★
Verified Purchase
Nice and long
I bought a set of these a ramps 1.4 project using a reprapdiscount smart controller 2004 LCD. Very happy with how well these work! Easily stretches from the front to the back of a Da Vinci Jr with a bit of extra for maneuverability.
★★★★★
Verified Purchase
Did what was expected.
Needed to have cables to extend and relocate my LCD screen on a 3D printer. Price was right and installed them and worked as expected.
★★★★★
Verified Purchase
Not as pink as the picture!
Not that it was a defining factor in my purchase just wanted to point that out, Cables work great gave me the extra length.
★★★★★
Verified Purchase
Long cables
I wanted to mount my 3D printer's LCD screen further away from the mainboard so this was perfect for my needs. The cables are a bit long so I just zip tied the excess out of the way.
★★★★★
Verified Purchase
Works perfectly on Ramps/MKS
Worked perfectly. In my situation, I had to cut off the tabs as my MKS Gen L has the headers on backwards. I'm using this on a ramps based 4'x4' custom CNC and the extension makes it much easier to use the LCD as a "jog pendant".
★★★★★
Verified Purchase
Perfect for a Ender3
Used this cable to move the control panel for my Ender 3 from the the stock position to the top of the printer. Perfect length. Control panel works as expected.
★★★★★
Verified Purchase
Great for Big Tree Tech tft screen
Needed to lengthen my BTT tft35 cables. This worked perfect.
★★★★★
Verified Purchase
Works with anet a8
Worked as expected on 12845 lcd screen for my anet a8
Question & Answer
Question :
Can i use this to extend my ender 3 pro display? if so how do i install it?
Answer :
Yes, these will work for the Ender 3 Pro. Simply replace the existing cable. The cable can only be inserted one-way on the mainboard, and display so no modification is needed. These also work for upgrading the display to a BTT TFT35, and the mainboard to BTT SKR1.3, or 1.4
Question :
What flavor are these 10pin connections?
Answer :
.1 inch spacing, female IDC rect headers
Question :
The description says 2pcs at 1m. Does this mean each cable is 1m or the two cables together is 1m?
Answer :
Each cable is 1m long;
Question :
Do you have a molex, digikey or mouser part # for the mating connector?
Answer :
2x5 make rect header w shroud
Comments
Post a Comment