Haoge 7" 180mm Soft White Diffuser Sock for Studio Strobe Reflector
Electronics > Camera & Photo > Lighting & Studio > Lighting > Lighting Controls & Modifiers > Diffusers
About this item
- This Diffuser Sock ringed with strong elastic fit around reflectors.
- The diffuser softens the light output.
- Ideal for Haoge 7" standard reflectors and other 7" / 180mm exterior diameter reflectors.
- Note: The Reflector is NOT included
Reviews
★★★★★
Verified Purchase
Nice secret weapon
These work great. Wish I had more need to use them. They're so much better than using a scrap of diffusion and having to tape or rig it to the light. Only area for improvement is they are a little tight. I sometimes worry it's going to break as I stretch it onto the reflector.
But definitely grab a few of these. It's one of those things that when you need it, you're glad you have it. And it's so cheap that you might as well have it just in case.
★★★★★
Verified Purchase
Great product!
They definitely do what they are supposed to do! Sadly, they don't work well for what I needed, but... that's my fault! :-P
★★★★★
Verified Purchase
Works great on a table lamp
Works great on a table lamp that I have sitting above my line of sight. Takes away the harsh glare of the light.
★★★★★
Verified Purchase
Fits standard 7" reflector nicely
I thought I was ordering a reflector with sock. If you need a reflector and sock, there are lots of options for not much more money. If you need sock only, then this is a good choice. It does fit my reflector just fine and is pretty easy to install.
★★★★★
Verified Purchase
Good background light diffuser
Perfect fit. Diffuses light with soft edges.m for backgrounds.
★★★★★
Verified Purchase
Holding up
Holding up so far. I've been keeping the modeling light off to avoid burning it. I used to just pin a diffusion fabric over my background lights and it was very messy looking and would get burned, this definitely solved both problems, and its shooting just the same.
★★★★★
Verified Purchase
Good Choice for a diffuser.
To say I loved such a simple product is probably an overstatement. It was a tight fit but that actually worked out and made it look more professional than my previous piece of cloth.
★★★★★
Verified Purchase
Nice
Very helpful with the flash
★★★★★
Verified Purchase
Five Stars
when I don't want a softbox on. Cuts just the right amount of hash flash in tight spaces.
★★★★★
Verified Purchase
Good material and fits well
Good material and fits well. I will be ordering more of them as soon as I get more diffusers.
Show for you like this post.
Question & Answer
Question :
Can this withstand the heat of the modeling lamp?
Answer :
it is no problem for modeling lamp.
Question :
Does this sock work for the Orlit Rovelight 601?
Answer :
The diffuser can be used for the 7" / 180mm exterior diameter reflectors. You may check your Orlit Rovelight 601.
Question :
Would this diffuser fit the alien bees B800 and B400 dish ok?
Answer :
The diffuser can be used for the 7" / 180mm exterior diameter reflectors. You may check your alien bees dish.
Question :
Could it be used on the top of a table lampshade?
Answer :
.. not sure, its a tight fit going over the fixture, best done with two people .
Question :
Would it fit well over 6" lamp head?
Answer :
Yes, it can't be used for the lamp head directly. It should be mount on the Reflector.
Question :
Will this fit my 8.5 inch clamp light? Will it stretch that far? The part it will actually fit around is 7 inches.
Answer :
No Stephanie it won't fit as it measures 7 inches.
Question :
Will this fit a 7.5" reflector?
Answer :
The item can be used for 7" / 180mm exterior diameter reflectors. You may check our 8" 210mm Diffuser Sock (ASIN:B01MDK6OFC) which can be used for 7.5" reflector.
Question :
Could it be used on the top of a table lamp?
Answer :
No, I’m uncertain about the consent heat and fire danger
Comments
Post a Comment