Lens Pouch for DSLR Camera Lens Fits for Canon, Nikon, Pentax, Sony, Olympus, Panasonic, and Other Lens BL-0009
Electronics > Camera & Photo > Bags & Cases > Lens Cases
About this item
- Dimension--Inner size: 4.72 x 9.84 inch of the diameter and height. Compatible with Canon 70-200mm f/2.8L, 100-400mm f/4.5-5.6L, 28-300mm f/3.5-5.6L, 70-200mm f/4L, Nikon 70-200mm f/2.8G, 80-200mm f/2.8D, 80-400mm f/4.5-5.6G, 300mm f/4D, 70-200mm f/4G, Tamron 70-200mm F2.8
- Good Protection--Removable devider attached in the len case to fix your lens from shaking, and the lining is 0.5 inch thick makes the lens pouch anti-fall and anti-pressure
- Waterproof--The lens pouch is made of highly dense nylon material which is waterproof, which can protect your camera lens effectively when it is out of the rain outdoors.
- Dust-Proof--The raised lining design prevents dust from entering the zipper connection which offers a relatively closed environment for your lens and protect it.
- After Sales Sevice--Support 30 day to return with no reason, 1 year warranty. Please contact us if you have any other question.
Reviews
★★★★★
Size: BL-0012 | Verified Purchase
Great case for the Sony 200-600mm!
An absolutely perfect fit for the Sony 200-600mm. You do not have to bend or warp the case to fit, and yet it sits snug enough inside not to let the lens move around at all. Even has enough room for the Wimberly foot!
The interior padding is very good and thick, thicker than most lens cases I've tried. They also give you an extra pad to secure the camera-side of the lens (see pictures) to ensure it doesn't wobble around inside. The straps are kind of ridiculously overly heavy duty, and include a shoulder pad. Lastly, the case itself is sturdy, I can toss this sucker (with the lens inside ) into the trunk of my car without worrying at all.
Overall very happy with it. Maybe it could have had pockets on the side and a waterproof bag attached like the Think Tank ones, but I personally wouldn't use them anyway, and would prefer the sturdiness and padding this one has.
★★★★★
Size: BL-0012 | Verified Purchase
EXCELLENT fits my huge Tamron 300mm f/2.8
This is the absolute best lens case I could find for my huge
Tamron 300mm f/2.8 (sony minolta mount) vintage telephoto lens. It will
either take the full lens with long lens hood attached, or with lens hood
flipped (makes lens compact for travel/storage) it will fit even with
my Sony Nex-6 Mirrorless Camera with large LA-EA4 Adaptor attached. thus
i can use it to hold both the Lens AND the Camera attached. Much
better because I do not want to carry more than one bag where i climb
through the brush or terrain to, e.g., photograph a family of foxes with
kits. The Thinktank (excellent) specific equivalent lens case would not hold this lens
with the hood extended and, I think, (not sure), the diameter was not adequate either.
(I am NOT Putting down thinktank cases they are excellent, but this seems equal, at least for the specific application of my lens.
this case comes with a convenient thick padded collar thingie you can wrap around the
more slender end of the lens. I love this Lens Pouch/Case. By the way,
because it's so snug (good!) when removing lens from case and especially if camera is
attached I turn case upside down or at downhill angle so gravity helps move
the entire lens or lens plus camera out, rather than grabbing and jerking or torquing
the lens or lens + camera to get it out. Also my lens hood, a neopreme type that
goes around lens and over front, will remain in the case, due to friction, when
removing. Remember to put your hand in to retrieve such after pulling lens out.
Reattach before putting lens back in back, don't just "hope" it fits right, in my
opinion, but use your own discernment. Quality and strength appear superb. Great
for storing the lens or even with camera and possibly good to get those silica
dehumidifiers to give the added value of keeping lens dry and preventing fungus etc.
Great Buy!
★★★★★
Size: BL-0012 | Verified Purchase
Plenty of room for tamron 150-600.
I bought a 150-600 tamron zoom lens last year and I have been looking for a good case. Earlier this month I found this case by BPaull. It not only fits the Lens by itself but I can get my Sony A7RIII with adapter into the case and Zip it up. The Lens hood is attached in reverse position but this is a minor inconvenience as far as I'm concerned. There is a strap for carrying the rig and for going afield this is just what I needed.
★★★★★
Size: BL-0012 | Verified Purchase
This case + Sony 200-600 with KES LP-68 Replacement foot
Fits like a glove. If it was maybe an inch taller you'd get it perfectly closed with an a7iii attached. For run & gun one lens shoot I leave the top open with camera attached. GREAT quality, amazing price fantastic value to protect this lens. The Kirk replacement foot is a little pricey but IMO a HUGE improvement pro grade and well worth it. Seller got it to my Hawaii address in about 4 days, thanks!
★★★★★
Size: BL-007 | Verified Purchase
This case won the contest for Nikkor 70-300
I comparison shopped between this case, and similarly sized JJC case, and the very expensive Lowe Pro case. This one had superior construction, superior padding, superior outer stiffness, and the inner ring allows you to secure the lens in the center of the case, so it doesn’t rattle around. The other two cases were way too wide for Nikkor 70-300 kit lens, and the JJC case actually came with the padding creased as though the tube had been stored crushed for a long time. I wish I could find a case the same length but even narrower than this one, so that the inner ring wouldn’t be needed, but….maybe later….
★★★★★
Size: BL-0012 | Verified Purchase
Olympus 150-400mm Lens Fits
I bought the pouch to protect my new Olympus 150-400mm lens and also to carry it when I don't want a backpack, but just my camera, another lens, and the 150-400. The lens, hood, and lens cover all fit snugly in the pouch. It is well constructed and the rings and straps make it versatile to carry in different ways. The price was very reasonable.
★★★★★
Size: BL-0012 | Verified Purchase
Padded and well made
It was a little on the pricey side but worth every dime. Made well and very padded I purchased for my Nikon 200-500 because the lowepro version was a bit too short. This case was recommended and I’m glad I purchased it instead of putting it in a Nikon soft pouch that wouldn’t protect well.
★★★★★
Size: BL-002 | Verified Purchase
Panasonic 12-42mm, Panasonic 25mm, SLR Magic 8mm
I used 2 of these for my small m43 lenses while on a trip to Thailand didn’t want to carry a camera bag for the 12days I was there. Ended up just using a basic Jands Sport and using the Velcro straps that are on the side of the pouches and attaching them to the bottoms of the shoulder straps! It was perfect! Even kept them on the bag while flying down the streets on a motorcycle 👍👍 amazing build quality would have thought they cost $20-30 plus! Even feels better built than the Canon 70-200mm 2.8 case 🤷🏼♂️🤷🏼♂️
★★★★★
Size: BL-002 | Verified Purchase
Fantastic little pouch for travel
I bough the small pouch for the new Fujifilm compact prime lenses. It perfectly fits all four compact Fujifilm F2 series of lenses. The pouch is made of very high quality material and it has enough padding to protect the expensive lens. When I bough I was not sure due to the low price but this pouch is much better than other expensive name brand ones. I am planning to buy few more for my other lens collection.
★★★★★
Size: BL-002 | Verified Purchase
Well-made, great value, snug fit
These lens cases are well-made and a great value.
They seem to me to be a bit tighter in interior dimensions than advertised. However, since they are so thickly padded on the inside there is really no definite size, since the padding is thick and compresses. I was happy that my lenses were snuggly held in place.
Show for you like this post.
Question & Answer
Question :
Does bl-0012 fit sony 200-600 with camera mounted? (a7iii)
Answer :
No. I have the BL-012 for a Nikon 200-500 and it is a perfect fit. But, there is no way the BL-012 would hold a mounted camera body.
Question :
Hi? i want bl-0012. do you have bl-0012?
Answer :
Yes, of course we have. You can find it with ASIN: B07Q3TP5CT
Question :
BL-0012 external dimensions?
Answer :
I don’t actually know exactly. I purchased this for my Nikon 200-500mm f5.6 VR lens. It fit fine, but I eventually wanted a case large enough for the lens with a Nikon D500 attached. So I gave this pouch away to a family member.
Question :
Suggestion for a Canon 55-250mm?
Answer :
I would suggest the BL-0003 based on internal dimensions. If you want one with a strap I would suggest the JJC Deluxe Lens Case in Small. Both are great cases.
Question :
does this work with a molle belt?
Answer :
It should. There is a velcro-secured flap for a belt.
Question :
I have a nikon af-s 70-300mm vr. which one will this lens fit into ?
Answer :
Meaure barrels. The dimensions should be listed in the product details.
Question :
Is the bl-002 large enough to fit a Nikon 10.5mm f/2.8 fisheye (2.5" x 2.5" x2.5")?
Answer :
I think it will work for that size of lens you are talking about.
This is a really small case pouch; I bought it for my Nikon35 mm and it was too small for it, but it works perfectly fine for my Nikon lens Z 16-50mm that has more or less the same size than your lens. It protects really well the small lens.
Question :
Is the diameter with or without the padding? what size bag do you recommend for canon 16-35mm f/4l is and sigma 14-24mm f/2.8 dg hsm art lenses?
Answer :
The hole inside the padding is 3.5 inch diameter by 4 inch height. A lens that size fits nicely with about 1/16 inch free-play on the diameter. The 1/2 inch padding is not removable. Additionally, it comes with a circular strip of 1/2 inch padding. 1.5 inches high. This fits around the small end of the lens if desired.
Question :
Will the bl-0004l fit a zeiss 15mm wide angel distagon?
Answer :
yes, of course, it fits for Canon 16-35mm F2.8; Nikon 24-120mm F/4G; Tamron 10-24mm F/3.5, thank you.
Question :
Does the bl-12 have room for the inverted hood as well as the wimberly foot on the 200-500mm nikon? and a d750 body?
Answer :
It fits my Sony 200-600 G series with the foot & hood (inverted).
Comments
Post a Comment