Nanuk DJI Osmo Waterproof Hard Case with Custom Foam Insert for DJI Gimbal Stabilizer Systems Including Osmo, Osmo+ and Osmo Mobile - 910-OSM17 Graphite
Electronics > Camera & Photo > Accessories > Binocular Accessories
About this item
- FEATURES A FOAM INSERT DESIGNED SPECIFICALLY FOR THE DJI OSMO, OSMO+ OR OSMO MOBILE AND ACCESSORIES
- WATERPROOF (IP67 RATED)
- IMPACT RESISTANT NK-7 RESIN/ DESIGNED TO ABSORB SHOCKS / PROTECT GEAR
- AVAILABLE IN 8 COLORS
- LIFETIME GUARANTEE.
Reviews
★★★★★
Color: Black | Verified Purchase
Fit's Osmo+ perfectly.
I absolutely love this case. Very sturdy, locks securely. Plenty of room for my Osmo+, even with my cellphone arm in place. Has slots for 3 extra batteries and some accessories. It also looks much more professional to roll up to a video shoot with this case, rather than the one that came with my Osmo. The latches are very secure, and I feel safe traveling with my investment well protected.
Now, I will say this. One of the pictures is very misleading. It shows a tablet in the small slot on the right side of the case. I use an ipad mini 4 with my Osmo+, and it won't even come close to fitting. Its too tall and wide (It doesn't fit in the pre-cut slot, and even if it would the lid wont close). I'm not sure what tablet they used, but it's not an ipad mini. I'm not convinced that anything much bigger than a cell phone would fit, simply because there just isn't a lot of height clearance on the case.
This isn't a deal breaker for me, because the rest of the case works flawlessly. I did not have any glue problems that others reported, and I'm not sure why others complained that the Osmo+ wouldn't fit. There is a small piece of material that is pre-cut, but must be removed for the Osmo+ to fit securely. All I had to do was remove it, because it was already cut. I did not modify my case at all...well, I did make the slot for the "Tablet" a little wider and used that to hold my case of ND Filters.
★★★★★
Verified Purchase
Great case!
I use the Nanuk cases for my DJI drones and Osmo+.
The case has sufficient slots spots for the Osmo/Osmo+, a mobile device the size of an iPhone 7 Plus, Osmo batteries and charger, it is designed very well.
If you use a DJI CrystalSky monitor, which I use for all my DJI aircraft and Osmo+, it’s a tight fit. The larger slot, which is meant for accessories, will hold the 5.5” CrystalSky, but when the case is closed, the case is just deep enough for the CrystalSky, compressing the foam on the bottom and inside the top lid. If the case was just another 1/2” to 1” deeper, it would be perfect. Due to the tight fit, I’m comfortable with it’s normal use, but I would be hesitant to use it where there is a chance of something heavy being placed on top of the case, such as checked baggage.
I am probably going to get a different case with the pluck type foam for the CrystalSky’s and extra accessories, such as the Z-Axis and some other items that will not fit in this case.
I highly recommend Nanuk cases, they are quality cases and work great!
★★★★★
Color: Lime | Verified Purchase
Great case, bad description
Does not really fit my original osmo mobile (grey one) very well but the case is amazing. The foam is just so so, but I really wanted the 910 case for another project so I’m not upset, especially when k got the like green case for $34 when this case is normally $60-65 or more.
I’ll be laser cutting my own foam insert soon.
★★★★★
Color: Black | Verified Purchase
Great build!
This case feels durable, and it gives me piece of mind that my equipment is supremely safe. I think the extra cost for the flashy colors is a little gimicky but that wasn't a factor for me as I'm "plain jane" anyway.. black and grey is fine for me. Room for all the essentials. As a side note, this case is made for a couple different units, I have 2 for OSMO pluses. When I first got them I couldn't figure out how to make the camera fit in its slots properly, until I realized there was a foam insert at the top (where the top part of the gimbal should fit) preventing it. Simply removed that piece and it fits like a glove. To further emphasize you may need to look closely at it to find it as it does blend in and kinda disappear into the rest of the foam cushioning. Very satisfied!
★★★★★
Color: Black | Verified Purchase
Perfect for DJI Osmo Mobile and then some
Perfect for the DJI Osmo Mobile. Able to fit the Osmo Base, (which is an extremely handy accessory) and a simple modification with a sharp blade (removing three 3/4" pieces of foam) allows the DJI Extension Rod to fit perfectly, however you will be sacrificing 2 battery slots, but that is not an issue for me. No issues with sticky glue either.
★★★★★
Color: Olive | Verified Purchase
because that's what it looked like in the photo
This is an extremely well put together case. My Osmo and accessories fit perfectly. I haven't found any issue with glue as I've read in other reviews. The only complaint I have, and it was kind of my fault, is the color. I thought I was ordering a black one, because that's what it looked like in the photo, but it was actually green. Other than that, I would recommend this case.
★★★★★
Color: Black | Verified Purchase
Very happy with the Nanuk DJI Osmo Plus Waterproof Hard Case
Very happy with the Nanuk DJI Osmo Plus Waterproof Hard Case. I purchase two other smaller ones from another manufacturer and was really disappointed in the quality and durability. My Osmo Plus fit perfectly in the foam cutout and has enough room for my extra batteries and accessories.
★★★★★
Color: Tan | Verified Purchase
The storage is very nice and secure
You simply can not go wrong on this case. The storage is very nice and secure. I like knowing the little bumps won't affect whats inside too much. This is definitely a step up from the weird violin shaped case the Osmo comes in. When I show up to a shoot, people take the camera just a little bit more seriously.
★★★★★
Color: Yellow | Verified Purchase
Best case out there.
Nanuk makes a case that feels better than a pelican and has a well thought out foam insert for protection that is just what you need with the bonus of some really great organization. I love it, you will too.
★★★★★
Verified Purchase
Well worth the purchase
Bought this case a few months back, I truly wasnt expecting much but when it arrived it was everything they promised and more.
Question & Answer
Question :
is this box working for osmo+?
Answer :
I do not have the Osmo+. I have the original Osmo. It fits perfectly for the original one. As for the (plus), the camera is different so I do not know if it will fit the (plus).
Question :
What are the dimensions of the right-rear long rectangular accessory cutout?
Answer :
6 1/4 inch long. 1 3/4 inch wide. 2 1/4 in depth.
Question :
Is a shoulder strap included?
Answer :
No strap was included.
Question :
Is there room for the Osmo with the X5 Camera attached?
Answer :
There is no room for the X5 for this particular case configuration. You would have to buy the case specifically for the X5 camera
Question :
Is there a way the osmo pro will fit?
Answer :
Yes it fits well
Question :
I have a osmo with and inspire 1 x3 camera. will this case fit the osmo wit the inspire 1 white x3 camera attached?
Answer :
I fit mine, with out a problem.
Question :
As of 8/19/16, is the glue problem fixed? i'm letting mine sit in the car on hot days, so far no visible glue leaks. are you happy with yours?
Answer :
I have not experienced any glue issue (although I keep mine in a temperature controlled environment (inside my house/office) - not my car).
Question :
Can you put a lock on this? Will it be sturdy enough to lock osmo mobile in, and ship FedEx ground?
Answer :
Yes, it has a lock loop that is very sturdy.
This is a pro grade case and my osmo fits like a glove inside. At first it seems like the osmo mobile doesn't fit, but trust me- it does. It's very snug and secure. All u have to do is pull out the pre cut pieces to allow mobile version to fit.
The plastic is very thick and strong. I threw mine in the lake with my osmo mobile inside to see if it was really waterproof... it is as advertised.
Case has areas inside for additional batteries, your osmo mobile base, etc.
I'm very happy with my purchase and it's a reasonable price.
Question :
is there room for the extension rod and feet?
Answer :
No, there is no room. Everything is pre-cut and no option to add more slots.
Question :
are you able to TSA lock the hard case?
Answer :
Yes, this case has openings for locks on both sides.
Comments
Post a Comment