[Review&QnA] Neewer 11 inches/27.5 Centimeters Dual Flash Bracket Tripod Mount for 1/4 inches Screw Camera Studio Video Light Stand External Flash Speedlite, Without Hot Shoe Socket
Electronics > Camera & Photo > Accessories > Flash Accessories > Camera Brackets
[Review&QnA] Neewer 11 inches/27.5 Centimeters Dual Flash Bracket Tripod Mount for 1/4 inches Screw Camera Studio Video Light Stand External Flash Speedlite, Without Hot Shoe Socket
About this item
- Length of this dual bracket is 11 cinches/27.5 centimeters; Made of aluminum alloy, solid enough to minimize potential damage
- Designed with 1/4 inches and 3/8 inches screw hole; Also comes with 2 pieces of 1/4 inches adapter screws
- Ingenious design: it supports 2 cameras or flash units by hot shoe mount adapter at the same time
- Affixed with non-slip rubber pad, vital for its stabilizing effect
- Dimensions:10.8 x 1.2 x 0.2 inches/27.5 x 3 x 0.5 centimeters,Maximum loading capacity:3 kilograms,4.45 ounces/ 126 grams weight;great portability, easy to bring with you in any situation£»Note: Without Hot Shoe Socket£¬Flash and light stand are not included
Reviews
★★★★★
Verified Purchase
Great dual camera bar
Used this bar to create a stereo camera pair rig to allow me to use dual cameras for shooting stereo. It was mated with two L brackets to create the vertical for the camera bodies. I did purchase a set of wing nuts, washers and bolts to attached the second L bracket. This allows me to slide the second camera sideways to tighten the bodies to the bracket or take out their respective batteries for charging. I needed two thumb knobs for the left L bracket base and the two wing nuts on the right. This locks everything down tight. This unit can also be used to mount two horizontal camera bodies side by side. I chose not to do that because the camera bodies I use are too wide and would not give me a sufficient distance between two lenses to create the stereo effect.
★★★★★
Verified Purchase
Great addition for recording kids games
Use a GoPro but also have a camcorder I like to use since it has a zoom. This thing is awesome as it is thin and doesn't take up much room in my camera bag and is very durable and feels well made.
★★★★★
Verified Purchase
Does a great job.
Can do a many things with this. I had a short one for years, but finally wanted to try something different in my set ups and needed a bigger one. This was better built and more useful than my old short one. Can use it on my standard tripods or my larger pole light mounts without any adapters.
I mostly do video of HS marching band. So I set up a couple cams on this for static shots pointing at different parts of the field. Works great. Normally only using small sony cams on them, but when using heaver items, being longer I need to make sure to give it a good balance, when on a normal tripod.
But it fits nice in my bag and find I use it more and more now than the shorter one. Just more options overall. Would get it again if needed. But only reason I would need to do that is if I lost it. Don't see how it can ever go bad. Even the small one I've had for 10+ years without any problems. I just wanted to see if a bigger one gave be more things to try. It did. :)
★★★★★
Verified Purchase
Took me forever to find, 100% what I was looking for
I wanted to use my Neewer flat panel light that is about as big as a small iPad and my phone or my camera on the same tri-pod. This works really well. MUCH better than when I was using a ring light and putting my phone in front of it using a Benks holder.
And I'm glad I spent the extra $2 to get this one as it's very sturdy and allows for movement if I am landscape vs portrait. easy to assemble. Easy to attach everything to. I feel like I can now take this setup anywhere and it will fold very nicely into a small space when I need to be at a location other than my office and do video.
★★★★★
Verified Purchase
Quality little thingy
Does what I needed it for, which was mounting two Nikon DSLR cameras on the same tripod.
★★★★★
Verified Purchase
Very Stout and Solid Construction
I use this bar to stabilize an old Nikon lens from the 1980s, while attached to a DSLR. It acts to help keep the heavy lens stabilized while attached to the plastic-bodied camera, which is not really rated to support such a heavy lens without some help. The DSLR camera is attached at one end with the supplied 1/4" inch photo tripod screw, and the lens lies on the Neewer bar with heavy-duty rubber bands to help stabilize the lens on the Neewer bar. I can attach an adapter on the bottom to attach to my mounting system, and it works like a charm. I was concerned there would be flexure in the Neewer bar, but it is extremely stiff and stout, and does not move. Highly recommended.
★★★★★
Verified Purchase
Absolutely solved my need!!
I needed to connect my Nikon D800 to an external monitor that I could attach TO the camera and shoot or video with. This device allowed me to mount the 7 inch monitor to the right of my camera (via tripod mount area) and it worked perfectly! Straight bar between camera and monitor with screws on the bottom holding both in place. Absolutely perfect for what I was looking to do!!
★★★★★
Verified Purchase
It's perfect for what I do!
Really excited about this! I've mounted a phone and an external microphone and achieved AMAZING LIVE PRODUCTIONS via YouTube and FaceBook.
It's made of METAL... reminds me of my childhood toys from the 80's
High quality. Don't think twice.
★★★★★
Verified Purchase
A must have!!
I bought this to live stream from my webcam and phone while using one tripod. I am happy about the ability to shift your device/camera/ left or right down the bracket without having to move your tripod. Also, you can loosen the 1/4'' adapter screws to turn your mounted device in any direction and tightening it back up without disrupting the other device. This product is very sturdy. To anyone wondering if this will work with a Logitech webcam, the answer is YES.
★★★★★
Verified Purchase
Able to hold 2 mirror less cameras
Bought this with the intention of mounting 2 canon eos R's with 70-200's on them. I was nervous at first but it worked out well. This mount was super sturdy and as long as the cameras are level and on video heads you'll be able to replicate.
Question & Answer
Question :
I would like to take advantage of both threaded mounting holes for my camera mount. Do you know what the distance between the two holes is?
Answer :
I purchased the 8-inch model, not the 11-inch. The threaded tripod mounts on the 8-inch are a half-inch apart, center-to-center; one is threaded for 1/4-20, the other is 3/8. I permanently mounted a quick-release plate using the 1/4-20 thread; the plate has a spring-loaded pin that the 3/8 threaded hole allowed the necessary room for it. I'm very happy with it, as my 2 GoPro Hero 5's are mounted just right for stereo use.
Question :
Can someone confirm dimensions: advertised is 11", but 27.5 cm. 12" is 25.4cm. Another dimension shown is 12.2". Still not 27.5 cm.
Answer :
I get 27.3cm overall length. 23.8cm maximum spacing between the 1/4-20 attachment screws.
Comments
Post a Comment