RuiLing 4PCS 1.5M 59 Inch Stepper Motor Cables Lead Wire HX2.54 4 Pin to 6 Pin
Electronics > Camera & Photo > Accessories > Telescope & Microscope Accessories > Telescope Accessories > Motor Drives
About this item
- Size: About 150 * 0.5 * 0.2cm/59 * 0.2 * 0.09inch(L*W*H);
- Made of high quality material, it is durable and long lasting use.
- It is compatible with many stepper models.
- Equipped with two connectors.
- 4 pin dupont connector of the driver side, compatible with RAMPS board and other.
Reviews
★★★★★
Verified Purchase
Quality material
The cables are well made and the end connectors are put together well. Just make sure the crossover wires match your motor, didnt realize it at first, but the wires are "crossed over" differently from my original wires. Instead of being A+, B+, A-, B- it was A+, A-, B+, B-.... I took a sewing needle and worked the pins out of the plug and moved them to the "right" placement for my motors.
★★★★★
Verified Purchase
SWAP pins for Ender3
As was previously mentioned, a simple swap of black/green (in my case) and it work perfectly. I really needed and appreciated the extra length after dealing with an extension in the past after converting my Ender3 to a direct drive. Found that the stock wires/pins were very shoddy. The need for a new extruder cable was manifested by the extruder motor oscillating quickly while the gantry went through the motions, thus pushing no plastic through. New cable and it prints like a new machine! Hopefully most folks that are fiddling with a 3d printer would have the wherewithall and tools to accomplish a simple task like testing and swapping pins, or they should probably find a different hobby.
★★★★★
Verified Purchase
Good quality wires, may need to re-arrange the pins in the plugs.
These are "generic" motor cables and need to be checked and possibly re-pinned to suit individual needs. Not all motors are wired the same, so it's a easy fix to re-arrange the pins in the connectors. The wires themselves are heavy gauge and pins are well connected. The folks that are complaining probably expected "plug n play" and that may or may not be the case depending on your stepper motor wiring. I liked them enough I bought 2 more packs to upgrade motor wires on my AM8 printer.
★★★★★
Verified Purchase
Needed longer wires for my stepper motors and these work great
The wires that came with my Eleksmaker laser etching toy were too short. With a little bit of effort these work fine. I had to swap a few wires on the plug that goes into the stepper but that is easly accomplished with a pin to lift up the little plastic tab that keeps the wire in place. The wire is a little thinner (1.3 mm vs 1.4 mm) than the old wire so possibly the insulation isn't as thick or the wire is smaller - but for the little steppers that come on the laser etcher they work fine.
★★★★★
Verified Purchase
Works just fine for ender 3 pro
Needed a longer replacement cable after foing direct drive.
As others have noted, you must swap the position of the black and green wires. The picture I have provided shows the correct wire position AFTER swapping for others to use as a reference. Please note this is viewing the motor and connection from the side of the output shaft.
★★★★★
Verified Purchase
Perfect for my current project!
These are simply long length stepper motor cables, which work perfect for my application. Also it is very easy to change the pinout on the connector to meet any custom applications.
★★★★★
Verified Purchase
Good quality and value
I used a couple of these on my 3018 Pro CNC router extension. The pins are easy to remove from the connectors so you can rewire them easily to fit your application.
★★★★★
Verified Purchase
Ender 3 V2 needs modification of these connectors
Thankful to previous reviewers that stated correctly the green and black wires need to be swapped on the six pin side.... simple easy adjustment and I was in business.
★★★★★
Verified Purchase
Nice deal. Not right for Ender 3 Pro
This are nice for the money but you will need to swap 2 wires for the Ender 3 Pro.
Be careful!!!
There is a video somewhere that shows how easy it is to remove the connectors from the plug and move them.
★★★★★
Verified Purchase
Direct drive ender 5 pro conversion
Had to swap 2 pins around for my purpose Direct drive ender 5 pro conversion, but works well.
Show for you like this post.
Zhumell 2" 2x ED Barlow Lens with 1.25" Adapter
Question & Answer
Question :
What gauge is the wire? 22ga, 24Ga?
Answer :
It appears to be 24 gauge wire. These cables worked great with my laser cutter after I arranged the pins properly. They weren't correct for my particular application. I just popped the pins out of one connector and put them back in the proper order for my motors.
Question :
did you know that both ends are wired differently? 4 pin is ((clip side up) red green blue blsck. six pin id green, blue , black red,.mudt rewire
Answer :
As a buyer, I did see this, and had some issues to rewire things, but it is also true that some steppers use different wiring pinouts as well on the stepper side. It is pretty easy to find the coils on the stepper (google it) and rewire as needed by slipping out the pin and then moving them as needed (note it can also be used to manually (vs. in software) change the direction the stepper moves. This is what I did, and it was pretty easy to do.
Question :
Pictures look like jst connectors both ends, but description says dupont connector on driver end. which is it?
Answer :
hi,
This cable has JST duPont style female connectors on both ends, one being a 4 conductor 2.5mm spacing center to center that is compatible with most common 3D printer stepper motor drivers terminations. the other end has a 6 position 2.0mm center to center spacing that plugs into the the most popular 3D printer and laser engraver stepper motors commonly available. It is wired with a XoXXoX pin layout with"X" being a conductor position and "o" being no conductor being present. They are very close to the stated length and there are 1 Meter. as well as 2 Meter lengths available from several vendors also. Overall i found these to be of good value and delivery to Arizona. i hope that helps. Good luck with work project.- harry b.
Comments
Post a Comment