Sea Dragon 2500F Head
Electronics > Camera & Photo > Underwater Photography > Underwater Lighting > Continuous Lights
About this item
- POWERFUL LED LIGHT - 2500 lumen LED light using the latest COB LED array technology (maintains 2500 lumens throughout burn time at full power), 120 deg. wide beam angle evenly illuminates the subject with no hot spots (90 deg. underwater)
- THREE BRIGHTNESS LEVELS - Easily adjust between three brightness levels – Full power (100%), half power (50%), and quarter power (25%); 60-minute burn time at full power and constant brightness
- EASY OPERATION - One button operation – Long push (1 sec) to power light on/off; short push cycles through 100% → 50% → 25% → 100%; constant light or emergency signal light (activated by long push of power button); one second flash or SOS at full power
- CONSTRUCTION - Anodized aluminum light head with fiber-reinforced polycarbonate body, corrosion-proof metal light head for heat dispersion and durability, waterproof battery compartment – even if the O-ring seal fails, the battery compartment is isolated so water can't reach the internal electronics
- FEATURES - Depth rated to 200 feet/60 meters; quick-release button; removable 25W Li-Ion battery with charger; dimensions: 4.8" x 2.2" x 3.8" (12.2cm x 5.6cm x 9.7cm), head only; dual NBR o-rings
Reviews
★★★★★
Verified Purchase
Sea Dragon
Fantastic video light for my under water photography and videos
★★★★★
Verified Purchase
Great underwater light
Great underwater light! Works great. Battery lasts. Part of Sealife system to which you can attache non-sealife camera's. I used both the Sealife camera and GoPro Hero 6.
★★★★★
Verified Purchase
Great Light
Some of the best UW lights you can get, very pleased
★★★★★
Verified Purchase
Five Stars
It's size and power makes it very convenient to handle during the dive.
Show for you like this post.
Question & Answer
Question :
Can this be mounted on the olympus PT-059 underwater housing?
Answer :
Yes, but you need to buy a SeaLife cold shoe mount. The alternative is to get a light tray on which you will mount both the camera housing and the light(s). This is my setup.
Question :
I want to mount this light on a gopole for use with a gopro. i want to mount it so it is suspended underneath the gopro. hardware recommendation?
Answer :
Mounting beneath a GoPro together on a GoPole may be tricky if I am picturing this correctly. You might need to get the SeaLife ball adapter then find some kind of dual GoPro mount and GoPro to ball adapter. Either that, or mount the light to the side of the pole in some way instead of at the top.
Question :
Will this light work with a GoPro Camera ?
Answer :
Yes it will work good but you might want to get the 2500 flood with tray version. It will come with a gopro mount to attach go pro on tray
Question :
Can you mount this to a flex arm that has a ys adapter? If yes does it need any other additional parts to make it fit?
Answer :
Yes, you should be able to remove the flex connect YS adapter allowing you to insert the Flex connect at the bottom of the video light directly into the Sealife flex arm.
Frankie G
HouseofScuba
Question :
Would this light require a fiberoptic connecting cable to work with an olympus tg6 and pt-059 camera/housing system?
Answer :
No cable required, it is not a flash. This is a led light. It is always on
Question :
Can this be mounted on other tray setup?
Answer :
That might be difficult. It has a connector suited for a sealife tray. Maybe sealife or third party vendors sell adapters.
Question :
This light come with the sealife sl998 flex-connect handle or similar
Answer :
This listing is the head only and will clip into any handle, arm or tray. We could make a combo with a handle for you tho. Just email us at New England Dive and we can build your custom light system
Comments
Post a Comment