[Review&QnA] Lexmark E260/E36X/E46X Photoconductor Kit
Office Products > Office Electronics > Printers & Accessories > Printer Parts & Accessories > Drum Kits
[Review&QnA] Lexmark E260/E36X/E46X Photoconductor Kit
About this item
- Black
- Approximate yield: 30,000 pages
- Also for use in e360d, X364DN and more
Reviews
★★★★★
Verified Purchase
Fixed my problem immediately!
Our Lexmark printer had shown for some time that we needed to replace the photoconductor kit, but we had ignored the message until our print quality was down right awful. I had no trouble inserting our existing printer cartridge into the PC kit and putting it all back in the printer. On the first test print, our print quality was back to what it should be!
★★★★★
Verified Purchase
Lexmark x264dn photoconductor kit.
I installed it right away since my printer was giving signs for deterioration, even though the one installed had been used for not even half of it's useful life, which I think is 30k coopies. I had made about 13k of them. I use it on my Lexmark X264dm multifunction printer and has been working as expected. I recommend it.
★★★★★
Verified Purchase
Lexmark Consumerable Product that's affordable? Yay!!!
Lexmark OEM stuff tends to be better than generic remanufactured stuff. But with that comes prices that are way, way, way too high. I can understand the razor blade business model of doing things, but I don't think razor blades are marked up as high as toner cartridges are...atleast as a percentage of cost. (I could be wrong though)...but here's a product that everyone will need at some point with their printer that's actually affordable. It does what it supposed to do and is affordable...yay Lexmark. Now just make your toner cartridges more affordable so I don't have to buy more often then not 2nd rate remanufactured stuff.
★★★★★
Verified Purchase
Solves the speckled print problem!
My printer was making thousands of little dots all over what otherwise was good printing. It started out not so bad but got worse as months went by. This kit was easy to install and immediately had me back to 'like-new' print quality.
★★★★★
Verified Purchase
They fit and give a clear copy.
The do give a clear copy.
★★★★★
Verified Purchase
Met my expectations.
Met my expectations.
★★★★★
Verified Purchase
It’s printer ink/toner
It does what you think it would do. It inserts like it should, dispenses wonderful ink on wonderful paper and does it all so wonderfully.
★★★★★
Verified Purchase
Works fine with E360dn
Aftermarket equivalent not that much cheaper, so I went with the brand name for a bit extra peace of mind.
★★★★★
Verified Purchase
often overlooked item that does need replacing.
If your printer is over 20,000 pages and spitting out sub standard quality pages you should check your pc kit levels and consider replacing the photo conductor (pc) as easy to replace as your toner cartridge and not very expensive.
★★★★★
Verified Purchase
As advertised!
Easy to install and a perfect fit.
Question & Answer
Question :
Will this work on a x264dn, thank you. best regards.
Answer :
Yes it does
Question :
Will this work in a ricoh sp 4410sf?
Answer :
As far as I know, and we have purchased 100's of toner cartridges through the years from different manufacturers, they have all been proprietary to their own specific brand. Lexmark once private labeled for IBM years ago and later marketed under their own name... I don't recall even those two interchanging. Good Luck!
Question :
Will this work on the 460 model?
Answer :
Yes. It will work in the Lexmark E460 series.
Question :
Will this drum fit e260dn
Answer :
This Drum will fit E260DN
Green World Copier and Supplies
Question :
will it fit model 544dn?
Answer :
No, if you have the Lexmark C544dn you either need LEXC540X35G Lexmark - Photoconductor unit - for Lexmark C540, C543, C544, C546, X543, X544, X546, X548
Question :
will this fit an X264DN printer?
Answer :
Yes, it will fit Lexmark X264DN
Green World Copier and Supplies
Question :
I am not quite familiar with this product, but I was told that my printer E260dn needs a drum. Is this product classified as a drum?
Answer :
Yes it needs a drum and that should fit. Our 350dn needed one too. I thought I got the wrong toner but it was correct after I got the drum.
Question :
Will this work for a lexmark e460dn?
Answer :
It says it does. I have e360dn. But it states it's for e260dn e360dn and e460dn
Question :
What kit is needed for photoconductor kit for Lexmark MS810n printer?
Answer :
Hi guys you will need to order Lexmark 520ZA
Question :
How do you remove the old photoconductor? I can't tell from the diagram included with the package.
Answer :
The toner and drum are connected, remove toner, on the left bottom side of the toner next to the handle is a release button depress and separate from drum.
Comments
Post a Comment