GODOX AD200Pro AD200 PRO with Reflector and Color Filters Kit, 200Ws 2.4G Flash Strobe, 1/8000 HSS, 500 Full Power Flashes, 0.01-1.8s Recycling, 2900mAh Battery, Bare Bulb/Speedlite Fresnel Flash Head
Electronics > Camera & Photo > Lighting & Studio > Lighting > Strobe Lighting > Monolights
About this item
- 🌿Godox AD200PRO Features Interchangeable Flash Heads. Flexibly snap in the exciting Round Head(NOT Included) with superior clean light spread, the Speedlite-Styled Fresnel Head(GN52, Direct-Focused Beam) and Bare-Bulb Head (GN60, Omni-Directional Beam)
- 🌿 |Large Capacity Lithium Battery|: The Godox AD200 Pro Offers 500 Full Power Flashes with 0.01 to 1.8 sec. Recycling. Expanded Manual 9 stop range of power adjusts from full to 1/256 in 1/10th stop increments
- 🌿 |2.4G Control with 330Ft Range|: Godox AD200Pro supports Nikon, Canon, Sony, Fujifilm, Olympus, Panasonic and Pentax TTL. With Master＆Slave Function, AD200Pro Can be Used in Combination with Godox TTL Camera Flashes, TTL Outdoor Flashes, etc
- 🌿 |Manual/TTL/Multi Flash Modes|: Fully Support Flash Exposure Compensation, 1/8000s High Speed Sync. Manual Outputs the User's Choice of Power, Modeling Light, First/Second Curtain Sync, etc. Multi Controls the Stroboscopic Rate up to 90 Times
- 🌿 |Lightweight Portable Easy to Use |: Easy to use buttons command a full range of functions like reliable channel triggering, group mode selectivity, HSS. The LCD panel clearly displays the status of all remote strobes, so you always have control of group lighting setup
- 5 Groups
- 32 Channels
- 1/8000 HSS and TTL
- 9 stops, 1/256 ~ 1/10
- Sharp LCD panel
- Stable Color Mode
- 14.4V 2900mAh Lithium Battery
- Over 500 Full Power Flashes
- Built-in 2.4G wireless X system
- FEC/FEB in 1/3rd stop increments over 6 stop range
- LED Modeling with Fresnel and Optional Round Head
- Delay Flash: 0.01~30 seconds
- ID function: OFF, 01~99
- Mounting ：1/4"-20 Female Threads
- Color Temperature：5600K (±200K)
- Stroboscopic Flash: Up to 90 times, 99Hz
- Connectors：3.5 mm Sync Input;Wireless Control Port
- Stable Color Mode: 5600° ±100°K over the entire power range
- Flash Exposure Compensation：±3 Stops in 1/3 Stop Increments
- Built-in Slave Cell：S1 and S2 Optical Slave Modes;2.4 GHz Radio System
- Optic Slave for Canon, Nikon ，Sony,Olympus,Panasonic,Fujifilm and Pentax
- Flash Ready Indicator：LED, Beep;Flash Hibernates Automatically After 30 Minutes of Non-use
- Sync mode: High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync
- Guide No. (ft/m ISO 100): Speedlite flash head: 170ft/52m (ISO 100) 35mm coverage; Bare bulb flash head: 196ft/60m (ISO 100, with the standard reflector)
- The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish or umbrella.
- The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control.
- Compatible Cameras under Radio Transmission(as slave unit):
- Nikon cameras(X1N as master unit)；
- Cannon Eos cameras(X1C as master unit)；
- Sony cameras(X1S as master unit)；
- Fujifilm cameras(XIT-F as master unit);
- Olympus&Pannasonic camera(X1T-O as master unit);
- The Removal rechargeable lithium battery Offers 500 Full Power Flashes with 0.01 to 1.8 sec. Recycling.
- 200Ws of Power Adjustable in 9 Steps from 1/256 to 1/1.
- High-Quality and Clear AV Panel Offers Convenient Operation.There is a thin protective film on the LED panel, please tear the film off after confirming that there is no problem with products.
- The AD200 pro has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user's choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head's built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, Panasonic and Fuji cameras.
- Stable color temperature at 5600±100K over the entire power range.
- The AD200 pro can be mounted via a 1/4" 20 threaded mounting hole on either side of the flash (allowing landscape or portrait orientation when using the speedlite head)
- Lightweight and Pocket Size, Great Portability
- 1 x AD200 Pro Speedlight
- 1 x Bare Bulb Flash Head
- 1 x Lithium Battery
- 1 x Battery Charger
- 1 x Carry Case
- 1 x PERGEAR Diffuser
- 1x Godox AD-M Reflector/Color filters
Reviews
★★★★★
Color: Black | Verified Purchase
bright, versatile, capable
There's a whole lotta light in this little unit, just waiting to get out. Excellent size, output, and versatility. I have both the standard AD200 and the PRO versions and I do like the indexed mounting system for the PRO much better than the standard version's simple 1/4-20 attachment. The PRO attaches to the supplied mounting bracket with 1/4 -20 as well, but the bracket has two little nubs that lock into the body of the strobe so that it does no have the chance of slipping loose on the bracket. Using the bare bulb head in a reflector or soft box is great, as is using it simply bare. The Fresnel head is exactly as it appears, a rectangular flash head like on a speedlight but with the addition of a dim, cold LED modeling light. Can't really use it as a modeling light but it can be helpful in seeing somewhat in really dark setting. I only mention my disappointment with the modeling light because I have the V1 speedlight and was thoroughly impressed with the LED on that unit, although I really don't use it much and I would have been totally happy with the V1 without a modeling light, I did expect a similar quality of light from the AD200 Fresnel head. Maybe that will come on future revisions. Enough about that modeling light, if you are considering purchasing an AD200 PRO, you are most likely more interested in how much light it produces and the portability. For size, portability, and communication with the V1 speedlight or one of the Godox triggers, these little units are amazing! Being able to control the AD200 PRO with the Godox flash already on your camera is incredibly convenient. The light output is predictable, precise, clean, and sufficient for a huge variety of situations. The accessories I have used feel like quality and perform quite well also. You can't go wrong purchasing a couple of these!
★★★★★
Color: Black | Verified Purchase
Giving up on Canon speedlites and switching over to these Godox units
For a speedlite that's basically the same size as my existing Canon EX600rt and EX580's this packs way more punch, has much faster recycle and longer battery life with it's Lithium-Ion battery in addition to multiple head/light options allowing me to pair it with various modifiers and really make the most of this super portable light. In either manual or TTL mode it has so far (only a month so far) provided fantastic consistent color and triggering.
For the last 5+ years my flash on location solution has been Canon speedlites with PocketWizard triggers (FlexTTL5/6) which has been good enough, but the Godox solution is simpler with a significant improvement to number of flashes (The AD200's battery seems to last forever) and recycle time between flashes (much faster than the Canon).
I'm very happy with this and can't see myself going back.
★★★★★
Color: Black | Verified Purchase
My second unit
I have the original version and wanted a second unit for more lighting options. So naturally I went with the pro version this time and couldn’t be happier. They say it’s more color accurate, but I haven’t really noticed too much of a difference. It uses the same battery as the original version. Are usually pair it with a soft box and an S bracket. Or are use the extension cord and put it on a camera strobe bracket do use it as a speed light
★★★★★
Color: Black | Verified Purchase
Awesome portable strobe with modeling lamp
This strobe is fantastic. It can be used free standing, on a light stand, with a light box, and with multiple head options. The battery lasts a long time and when paired with the optional on camera trigger it is exceptionally versatile and powerful. Great for portraits and use at wedding receptions where you don't want to drag around huge lighting setups.
Round head attachment and gels are available, which makes it even more versatile. You can toss two of these in your camera bag and have super high quality lighting on the go.
★★★★★
Color: Black | Verified Purchase
Great light!
I use this strobe in conjunction with an Explor 600 to shoot real estate interiors. It's great when my small Godox strobe isn't enought but the 600 is overkill. Only downside, it doesn't have an attachable stand to set it on surfaces. Still, great portable flash....really long battery life.
★★★★★
Color: Black | Verified Purchase
Love!
I really like using this versatile flash! Simple to use, small, and powerful! It works with my existing Flashpoint and Godox mix of lighting and trigger equipment.
★★★★★
Color: Black | Verified Purchase
Portable, easy to use, bright
This little monolights are excellent. Extremely portable and easy to use. Battery life is amazing. I bought 2 and i'm very happy with my purchase.
★★★★★
Color: Black | Verified Purchase
GODOX AD200Pro
Great high-speed sync flash.
★★★★★
Color: Black | Verified Purchase
All 5 stars for a 200 watt flash
Yup everything's great about the flash. 1 star to amazon prime for not delivering to prime members on time again.
★★★★★
Color: Black | Verified Purchase
Godox AD Pro
First time purchasing a portable flash strobe. It's portable, light and easy to manage. For now, everything is working out. Love how portable it is!
Show for you like this post.
Question & Answer
Question :
What’s the size is the beauty dish ? I’m looking for honeycomb grid for the unit
Answer :
Here's what I did: Purchase a type S bracket to hold the unit, it has a built in Bowens mount. Once you have the standard Bowens mount, you can get a matched set of reflectors to honeycombs, they tend to come in roughly standard sizes. I would suggest a protective storage box for your honeycombs as they tend to get jacked up when traveling free in a bag.
Question :
Would this fit a Westcott Softbox?
Answer :
Yes, if the Westcott Softbox has a Bowens mount, then you need the Godox S2 Speedlite Bracket for Bowens ($25 at B&H). Works like a charm with the AD200Pro fitting into the bracket and then mounted on the softbox. I highly recommend the AD200Pro and the bracket, as well as all the other Godox gear, especially the X1 radio transceivers.
Question :
Is it best to buy the adorama rebranded version of this “flashpoint”because it’s warranty is handled by an american vs in china. .
Answer :
If you buy godox, you have to ship it to China for service. That will definitely take longer.
Comments
Post a Comment