Godox X2T-C 2.4G TTL Wireless Flash Trigger with 2X X1R-C Controller Receiver for Canon,E-TTL II Function,Compatible Smartphone Remote,Compatible 600EX-RT/580EXII/580EX/430EXII/V860C
Electronics > Camera & Photo > Lighting & Studio > Lighting > Remote Triggers
About this item
- With 2.4G wireless transmission and 100m workable distance,X1R can function as a remote studio trigger, a camera flash trigger and a camera shutter release
- X2T Compared with X1T, the interface is changed from left to right, which is suitable for direct one-hand operation; the dial is changed to the bottom and the display becomes larger.
- support for functions included TTL autoflash,manual flash,1/8000s high-speed sync,flash exposure compensation,flash exposure lock,manual focus,mobile APP adjustment parameters, scanning function,modeling flash,etc.
- 5 groups of 32 channels remote control and trigger, 01-99 wireless ID setting, the ID and channel of the master unit and the slave unit must be set to match to trigger, effectively avoiding signal interference
- with large and clear LCD panel to offer great convenience,Supports Type-c USB firmware upgrades, support for Canon series (E-TTL II autoflash), support for all cameras with PC output
- model: X1R-C+X2T-C
- Compatible cameras:Canon cameras (E-TTL II autoflash)Support for the cameras that have PC sync socket
- Built-in wireless:2.4G
- TTL autoflash:E-TTL II
- Transmission range(approx.):0-100m
- Modulation mode：MSK
- Channel：32
- Wireless ID: 01-99
- Power supply:2*AA batteries
- Group：5
- Output: 2.5mm sync cord to output
- Display:Large LCD panel, backlighting ON or OFF
- 2.4G Wireless Frequency Range:2413.0MHz-2463.5MHz
- X2T Firmware upgrade:Upgrade through the Type-C USB port
- 2* X1R-C TTL flash Receivertter
- 2* X1R-C TTL flash Receiver
- 4* Remote cable(C1,C3)
- 2*Sync cable
- 2*Sync adapter
- 2* manual
- 1*TUYUNG cloth
- Compatibility:X2T-C for Canon cameras;X2T-N for Nikon cameras;X2T-S for Sony cameras;X2T-F for Fujifilm cameras;X2T-O for Olympus and Panasonic cameras and X2T-P for Pentax cameras.
- With 5 groups,32 channels and access to 99 wireless ID settings to limit the interference from other nearby systems. (reminder:only when the wireless ID and channel of the master flash and slave flash are same,can the be triggered.)
- Fully support TTL autoflash,1/8000s high-speed sync,multiflash mode,manual mode,flash exposure compensation,adjusting the lighting parameter through the mobile APP,scan setting,one-shot and multi-shot setting,control of the modeling lamp,adjusting all groups' output value simultaneously,etc.
- Godox first TTL wireless flash trigger receiver X1R-C is suitable for Canon DSLR cameras. 2.4G wireless transmission, 32 channels, the max. flash synchronization speed is up to 1/8000s
- The receiver equips with big LCD panel to offer convenient operation.
- The base can directly fix the hot shoe or the knob on the 1/4 screw interface
- 2AA batteries: 2 AA batteries (sold separately) for transmitter and receiver
- USB Firmware upgrade port for latest version for compatible with X2T-C transmitter
- work as wireless Godox flashes trigger
- work as wireless Canon/Nikon/Sony speedlites trigger
- work as wireless Canon/Nikon/Sony shutter release trigger
- work as wireless flash(without godox X system) trigger by 3.5mm sync jack
Reviews
★★★★★
Verified Purchase
This kit saved my cheap speed lights
This kit saved the cheap speed lights I bought for my Canon camera. As a very amateur photographer I thought it would be nice to have a couple of speed lights to use with my Canon 2000D / T7 camera. My intent was to use two or three off camera for some product photography. Figuring I wouldn't use the speed lights very much, I bought cheap speed lights that were listed to work with my camera (the Canon T7 does not have the usual hot pin to fire the flash but uses e-ttl instead). Since the kit I bought came with remote transmitters and receivers I figured everything would work happily together. I was wrong. The trouble is I didn't have time to really test out the speed light kit as soon as I got it. I missed the return window by the time I got to testing and realized I had a problem.
For months I thought I had a speed light kit that simply wouldn't for me and I'd have to try to sell it. When I found this Godox transmitter/receiver kit I wasn't convinced it would be the right thing and it cost more than I would have liked as an experiment.
It turns out this kit is exactly what I need. My cheap camera and speed lights now work great together and I can make all of my flash adjustments right at the transmitter. This is even better than I had hoped. Looking back I wish I had paid a little more for the speed lights and bought lights with receivers build in because this new arrangement ended up costing me more. I'm so glad this Godox trigger kit worked out and saved my nearly useless flash units.
If you find yourself in a similar situation buy this kit, it works very well.
★★★★★
Verified Purchase
Work great!
These are great. I bought these for my speed lights and then bought two Wistro AD200 strobes and they must connect auto instantly. I went to connect a strobe and turned it on and the trigger and to my surprise and didnt do anything. Don't know what the range is on them but who stands a hundred yards from their lights?
★★★★★
Verified Purchase
Works like a charm and is wayyy cheaper than the Canon brand
Easy to set up, battery life indicator on screen is super helpful. Used these for a rather important studio gig that required me to have a portable studio. I paired it with the the Canon Speedlite 600EX-RT and it worked flawlessly with little setup. I also used it to pair some neweer strobes at the same time and it all worked with no problem.
★★★★★
Verified Purchase
Great kit for OCF with Canon cameras
I needed to trigger my Godox AD200 pro off camera as well as shoot with my Canon 580 EX ii and Canon 430 EX ii on my Canon 5DM4 and 6D for a wedding. The X2T-C TTL and XIR-C worked flawlessly. I was able to manage triggering the AD200 remotely while bounce flashing the Canon speedlights on camera with different manual settings. The build is great and the products were well packaged. Would order again!
★★★★★
Verified Purchase
Set-up is the key. Don't rush it.
"Heck, I don't need to read the manual!" Yeah, actually I did. Once I finally got it all figured out, it's a wonderful piece of kit and it makes off-camera flash really easy. YouTube videos helped a lot, but the gear itself is fantastic. Get it!
★★★★★
Verified Purchase
Read instructions
Read instructions well
★★★★★
Verified Purchase
User
Amazing product. Handles all my professional needs.
★★★★★
Verified Purchase
Plus the vendor made a mistake in the initial order and once it was straightened out sent me the right items in two days.
So far I love them.
★★★★★
Verified Purchase
Work flawlessly would recommend.
★★★★★
Verified Purchase
Show for you like this post.
Aputure 2-Bay Battery Power Station V-Mount Output up to 480W DC Power via 3-pin XLR (48V @ 10A)
Question & Answer
Question :
Can I change the flash strength of the slaves from the transmitter? Or do I have to change the slaves on the units themselves?
Answer :
You can adjust everything from transmitter
Question :
Will it work with Neewer NW680 hss flash?
Answer :
yes
Question :
Does it update automatically from the camera settings, or do the settings have to be entered into it?
Answer :
It depends on the flash unit you're using. If the flash unit does TTL, it'll work just fine. If not, the trigger won't do TTL independently.
Question :
I need to trigger slaves with 2 camera bodies. do I need to purchase a second transmitter?
Answer :
You can trigger Godox flashes with either a radio transmitter or with another flash. So no, purchasing a second transmitter isn't strictly necessary if you have at least two flashes.
Question :
Will this work with the ettl in the canon eos r? i have some pocketwizards that will not work with the new ettl system in the eos r.
Answer :
It works with the ETTL on my 6D. Don't have any R-bodies yet.
Question :
I have 4 flashes, none that are listed. will i be able to control any of these? canon 430ex. yongnuo yn460-ii, yongnuo yn565ex, and olympus fl40
Answer :
can control canon 430ex,
yongnuo yn460-ii, yongnuo yn565ex, and olympus fl40，We have not tested it, so I don't know if this trigger can control it.
Question :
Will it work with canon speedlite 470ex-ai?
Answer :
yes
Comments
Post a Comment