Godox Xpro-N TTL Wireless Flash Trigger Transmitter for Nikon, 1/8000s HSS, TTL-Convert-Manual Function, Large Screen, 5 Dedicated Group Buttons, 11 Customizable Functions with PERGEAR Cleaning Kit
Electronics > Camera & Photo > Lighting & Studio > Lighting > Remote Triggers
About this item
- 🌿 |TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc
- 🌿 |SMART TCM BUTTON|: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode
- 🌿 |Versatile Using Methods|: As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Nikon Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack
- 🌿 |01-99 WIRELESS ID|: Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively
- 🌿 |LARGE LCD Display|: 16 Groups and 32 Channels to Wirelessly Control and Trigger. Full Graphic Display of 5 Groups simultaneously
- TTL Autoflash, Multi Flash, Manual Flash
- 1/8000s High-Speed Sync
- Flash Exposure Compensation
- One-Shoot & Multi- Shoot Setting
- TTL-Convert-Manual Function
- 01-99 WIRELESS ID, Avoid Signal Interference effectively
- 16 Groups and 32 Channels to Wirelessly Control and Trigger
- Large Dot Matrix LCD, Full Graphic Display of 5 Groups simultaneously
- FE lock
- 11 Customizable Functions
- Manual Flash 1/1 - 1/256 Power
- Modeling Light Status Control
- Adjusts the Flash Zoom Coverage for Each Group
- Selective Transmission of Data Conserves Energy and Battery Life
- Magnification Function Displays Details of Each Group Settings
- Global Adjustments to Exposure Values for Multi-Group in M Mode
- 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation
- Support Type-C USB Firmware Upgrade and Wireless Triggering by 2.5mm Sync Cord Jackc
- XPro- N TTL Wireless Flash Trigger can control the flashes with built-in Godox wireless X system e.g. camera flashes, outdoor flashes and studio flashes.
- Support TTL Autoflash, Multi Flash, Manual Flash, 16 Groups and 32 Channels to Wirelessly Control and Trigger.
- As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless PENTAX Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack.
- Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode.
- Large Dot Matrix LCD, Full Graphic Display of 5 Groups simultaneously. 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation. 11 Customizable Functions.
- Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode.
- One-Shoot & Multi- Shoot Setting
- 01-99 WIRELESS ID, Avoid Signal Interference effectively.
- Support Type-C USB Firmware Upgrade and Wireless Triggering by 2.5mm Sync Cord Jack.
- Metal Hotshoe for long working life.
- Focus Assit Beam
- Enter Sleep Mode Automatically if 3 minutes without operation. Power supply: 2*AA batteries (NOT Included).
Reviews
★★★★★
Verified Purchase
Nice upgrade over the old X1T
UPDATE 09/25/18 - I was sent a replacement unit by Pergear, and the new unit works as advertised. I had one of my AD600's set to low power and triggered it rapidly for 40-50 flashes and it didn't drop a single flash.
I would strongly recommend testing the unit when it arrives, and if faulty request a replacement before you plan on taking it on a real shoot. That said, I look forward to using this on my next photo shoot. The interface improvements over the X1T are significant in my opinion.
----
Original Review:
I wanted to like it, but out of the box I have two problems, one minor and one major:
1.) The battery meter display always shows more than 2 bars, no matter how fresh of batteries I put into it. I even tried another brand of battery, still two bars.
2.) The big one... it doesn't trigger my AD600 strobes consistently. If I take 10 photos in a row it might actually trigger the strobe perhaps 5 times in a totally random manner. Sometimes it will work 3 shots in a row, only to drop the next three, sometimes it misses 1 out of 4, catches one, and drops 2... either way the miss percentage is much, much too high. I took it off the camera and use the manual trigger button on the XPro, but even using this method standing less than 6' from the AD600, it still misses a larger percentage of triggers, even if I set the strobe to minimum power so it recycles pretty much instantly. This is with one strobe... I can only imagine the chaos if I tried to trigger both my AD600's and both my DE300's when doing studio work.
I updated the firmware to the newest version on both the XPro and both of my AD600, and this did not resolve either issue.
Note that my old X1T-N works perfectly. I can press the manual trigger button as fast as I like at 1/256 power and it misses maybe one out of a hundred shots if that.
I don't know if I got a bad unit or what, but I'm not impressed. It's too bad because the interface is leaps and bounds better than the clunky X1T, but I'll take reliability over a pretty interface any day of the week.
★★★★★
Verified Purchase
This trigger has served me well for years and here's some magic that can save you lots of money.
I've been using this trigger on my Nikon cameras and the Fiji version on my Fuji cameras for years. They have never failed me.
Now here's the little know trick. Either the Fuji or Nikon triggers work with all manner of Godox flashes. I can put Nikon and Fuji speedlights on stands, along with my higher power
Godox AD200
and
Godox AD600 Pro
. It doesn't matter, and I can mix and match as I like, and they all work together, shooting with a Nikon or Fuji and the appropriate trigger.
★★★★★
Verified Purchase
Great Addition to your Godox line of flashes!
This upgrade from the previous wireless remote controller is much better and easier to use . . no more hitting your head and changing the settings when shooting . . good LED display shows settings and is much easier to define which flash you are setting, as well as the other flashes you are controlling.
Use it on all 3 flashes: Godox V1, AD200 Pro, AD600 Pro . . . in light modifiers and stand alone flash, gives me complete control and ability to set (and change) each light as needed.
Still some getting used to, but once you are familiar with setting and controlling the unit, it is a GREAT tool in your portrait or wedding photography toolbox!
Would definitely buy this one again!
★★★★★
Verified Purchase
My entry into the world of Godox
I have used the sending unit once now since receiving it. No issues in setting it up and it worked well. I needed to change the go to sleep setting to off as I did snap a couple and that woke up the device and had to take another shot. Only complaint I have is the side door that covers the sync port and the USB port, doesn't stay in place when putting it back. Not a major issue for me, but would like to see better quality there.
★★★★★
Verified Purchase
Another amazing Godox flash trigger
Godox is king of affordably priced, high quality lighting gear for cameras. This works flawlessly with Godox flash units when mounted on Nikon cameras. I have never tried to use this trigger with non-Godox flash units. The trigger is well designed and built, and works intuitively with Godox flash units. Any questions can be resolved by reading the manual.
★★★★★
Verified Purchase
It does the job
There are some features I'm sure I'll never use since I usually only use one flash at a time. But this does what it needs to do. No complaints.
★★★★★
Verified Purchase
Really great transmitter
Controls are far easier than the old remote. The build quality is really good and the screen is super easy to read. Consistency is great (pocket wizards used to misfire all the time for me). Size and feel is nice too. No complaints here
★★★★★
Verified Purchase
Flawless with ad200
I have shot 3 weddings with these triggers with Godox ad200’s. Had 2 triggers going at a time, absolutely flawless. They are mostly plastic and feel kind of cheap, but they work perfectly.
★★★★★
Verified Purchase
Best price and value for your money.
Takes time to master the controls. But once you're used to it, you can't live without it. It's fairly cheap compared to another "overpriced" product. I've used them for my Godox V1-N and Godox V860II N and I loved the ease of use for fine-tuning your lighting. They're easy to set-up, less footwork to change the intensity of the speedlites (because you can change it through your remote), and very affordable.
Overall, I am happy with this purchase.
★★★★★
Verified Purchase
This trigger is terrific. The directions included in the package leave a ...
This trigger is terrific. The directions included in the package leave a lot to be desired (I am being very kind). There are many YouTube videos, some helpful, to assist one's learning of how powerful this little device really is. Control up to 5 groups of lights with different settings from this unit. Range is outstanding and, to date, hav had no communication issues between this trigger and off-camera lights.
Show for you like this post.
Question & Answer
Question :
Will this work with a Nikon SB-910?
Answer :
The Xpro-N TTL is a hot-shoe-mounted radio frequency (RF) transmitter for controlling one or more remote flash units during wireless flash photography. To work directly with a flash, the flash must have a compatible RF receiver. I have reviewed the specs for your flash and see no evidence of a compatible, built-in receiver. So, you have two options. 1) If you already own some other wireless flash unit that IS compatible, you can use the Pro to control the unit and allow the SB-910 to operate in the slave mode where it flashes when it senses the light coming from the other flash unit. It's kind of like using the built-in flash on your camera to trigger the SB-910 as a slave except in this case, you would be using a remote flash instead of the camera's built-in. Doing this requires the SB-910's sensor to have a good view of the light coming from the triggering flash. I've tried this myself and was unhappy with the results. So I spent another $40 and went with option two. 2) Spend $40 and buy a Godox X1N 2.4G Wireless Flash Single Receiver for X1N Transmitter Nikon DSLR Camera (X1N-R Receiver). It has a flash-like mount on the bottom that you use it to mount to a plastic foot or other, similar stand, and a proper hot shoe on the top to which you mount your SB-910. This is the option that makes you look like you know what you are doing!
Question :
Will this work with the neewer vision 5 i-ttl strobe?
Answer :
No it does not. I have both and I am very disappointed. I have many different units. And it only works with half. Useless!
Question :
Is it compatible with vision4?
Answer :
They use the same 2.4 system, but I can’t say with certainty they will work together. I originally bout mine with a Godox 400. I tried for two days to get the trigger to fire the flash without success. The documentation is abysmal. Eventual it did get it to work with two Godox speedlites. But the trigger has about ten buttons. Press the wrong one. And be prepared for hours of. Getting to work again
Question :
Is this compatible with photottix strato II multi receivers?
Answer :
No Godox system only
Question :
Hey! It works with a Nikon 5200?..
Answer :
Yea I’m sure it will . I used it on my Nikon D750 though. But the horse shoe system for Nikon cameras are all the same so it should work.
Question :
I have an old nikon sb-24 that did ttl with my nikon 8008. i would like to use this flash off camera with my nikon d7000 with this unit, will it work?
Answer :
That’s a good question . I will day this , I use my Nikon transmitter on two Sony cameras and it works fine . So with that being said I would give it a shot .
Question :
dose it work with nikon D850 ?
Answer :
Yes, It works with most Nikons of the digital age.
Question :
Will this work with a nikon sb-700 flash using the x1r-n ?
Answer :
Yes, it will work with any Nikon or Nikon compatible flash connected to the X1R-N.
Question :
Is that radio transmitter compatible with the Nikon D850?
Answer :
I use mine on a D500 and d7200, It works just fine with both. I have a friend with a D850 and it works good on his camera too. Although, once, he ran into a problem with his D850 not trigging the transmitter but resetting the camera's setting back to factory default (then putting his setting back in) made the transmitter work just fine again. I've used it on my D7200 in both manual and ttl modes with as many as 3 Godox flashes (Godox TT685N and TT600). This is a nice set up. In Manual mode you can change your remote flashes settings from the transmitter. This allows you to stay behind the camera and tweak your remote flashes settings without have to touch them. Well worth it, for somewhere between $300 and $400 you can get a complete 3 flash/remote setup. Hope this helps
Question :
Funciona para Nikon d7500??
Answer :
Perfecto funciona super
Comments
Post a Comment