[New Version] SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail – 2203
Electronics > Camera & Photo > Accessories > Professional Video Accessories > Stabilizers
About this item
- Not for 6K Pro!!!!!!!【HIGH CUSTOMIZATION】SmallRig BMPCC cage is specifically designed for Blackmagic Design Pocket Cinema Camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. It could be used on DJI Ronin S or Zhiyun Crane 2 gimbal stabilizer
- 【PERFECT PROTECTION】Secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Rubber pads on the bottom protect your camera body from scratching
- 【MUTIPLE MOUTINGS】This cage comes with multiple mounting points, such as 1/4’’ & 3/8’’ threaded holes, cold shoe and 3/8’’ locating holes for ARRI standard, allow you to attach more accessories, like microphone or SmallRig Articulating Arm – 2070, etc
- 【NATO RAIL】Features built-in nato rail that allows you to quickly release accessories with NATO clamp. Mounting SmallRig Side Handle - 2187 for hand-held shooting
- 【FEATURED RECOMMENDATIONS】Compatible with Ronin S and Crane 2. For better setup, please search “SmallRig Mount for Samsung T5 SSD 2245”, “SmallRig lens adatper support for Metabones 2247” and “SmallRig HDMI cable clamp 2246”, which are exclusively designed for BMPCC 4K & 6K
- Full Cage for BMPCC 6K or 4K Camera
- 1/4"-20, 3/8"16 & ARRI Accessory Threads
- Maintains Access to Camera Controls
- Integrated Shoe Mount, NATO Rails
Reviews
★★★★★
Verified Purchase
Does not fit when mounting on a Zhiyun Crane 3 Lab
SmallRig's equipment is great quality always has been, and probably always will.
In this case it's not a failure on SmallRig's part. When mounted on a Zhiyun Crane 3 Lab, it makes the Pocket 4k just slightly too wide to mount.
If you have a Crane 3 Lab, you might want to look at a 1/2 cage. Full cages will be too wide.
★★★★★
Verified Purchase
Works as advertised
First off, if you're wondering about getting a cage for the BMPCC 4k the answer is 100% YES. You need to rig this camera up to get the benefit of its crazy specs.
Anywho, this cage does exactly what a cage should do - allows for dozens of configurations of accessories thanks to multiple screw mounts and cold shoes while still allowing access to the essential ports on the camera. Want to completely rig out the camera for professional shoots? Done! Need a low profile look that can still fit into your camera bag? Done!
There is a tiny bit (like, maybe 2-3 degrees) of play between the camera body and the cage on the x-axis going side-to-side, but that's not something will affect how you shoot. The metal of the cage is sturdy and should protect the majority of the camera body should you drop it, too. The only slight flaw I have with the cage is that it doesn't have as many mounting points as it could, but that's a small quibble.
Don't hesitate to give this a go, the price is right and the quality is undeniable.
★★★★★
Verified Purchase
One of the best cages i've owned
I really love how this cage has its own L wrench that is magnetized to stay in place. Very helpful when your on the go and your not by your tools to. Very easy to set up and its very durable. Theres lots of room to expand on it and i personally like how the cage adds to the feel of the camera. almost as if its adding more comfortable grip to the camera.
Only CON that i see with the cage is that it does protect the camera 100% some area stick out more than other or flushed around the edges. This isnt a deal breaker by any means. Solid piece of purchase.
★★★★★
Verified Purchase
The accessory that you must have for the BMPCC 4k
The perfect solution to use the BMPCC 4k with the DJI Ronin S and many other essential accessories, such as an external battery, a microphone, etc.
The balance is at the maximum limit given by the Ronin S, I almost had to add a counterweight to the right side of the camera, but it was not necessary.
★★★★★
Verified Purchase
Great cage at an affordable price
This is a very well engineered and built BMPCC 4K/6K full cage. It holds all of the accessories I need (plus some space for ones I don't know I need yet.) I got this because I needed a sun hood for the screen and a way to hold external drives. It had two NATO rails, and I got an attachable one for future needs.
All in all, this is a impressive piece at a good price.
★★★★★
Verified Purchase
Backbone of the 4K/6K!!!
If you are looking... pause and buy this now! I have three BMD cameras and each have this cage for accessories. The mounting points for rigging options is astounding. I’m glad the price point is low because the accessories that can be mounted tends to add up. Grab an SSD holder, and a top handle for starters. After that, the world is yours... but you need this cage to be a make the most of the camera system (in my opinion). You can add hand grips, articulating arms, cable clamps, cold shoe mounts (mics, monitors, transmitters, converters...). The next phase of your production life starts with THIS. Go for it! BKYLE_
★★★★★
Verified Purchase
Great quality for a good price.
Works great and costs a lot less than the competition. Love Small Rig and have a lot of their products. The only downside is that it is hard to open the rubber covers that cover the HDMI Port, Audio Ports, Power Port etc with the cage installed. It’s also a little tricky to open the battery lid but it’s all doable. I use my pocket knife or a key to open the rubber covers and the battery lid is easy with a flick of a fingernail once you get the hang of it.
★★★★★
Verified Purchase
Liked it a lot better then I had expected.
I bought this so i had something cheap to protect my BMPCC4K as I waited for the Tilta. But as soon as I put it on the camera I loved it. It’s light, has NATO rails for my old small rig handles and makes the Pocket a lot easier to hold. Sounds dumb but the BMPCC4k is kind of awkward for me. I didn’t really like the design. But the cage adds a little lip to both sides of the camera and seemed to balance it out.
Its very cheap (price) compared to all the others, fits well, seems strong, plenty of mounting points and fits into the Smallrig ecosystem perfectly.
This is the first camera cage I’ve bought and left on my camera permanently.
★★★★★
Verified Purchase
Super useful, strong, light weight cage.
This is a must have cage for your bmpcc4k. It is light weight, strong, has lots of accessories points and great features. Get one worth every penny. Well priced but I love smallrig stuff, they are reasonably priced, well built great quality can't say enough good things about them.
★★★★★
Verified Purchase
Look no further
Great price, great cage for the camera. I have been buying small rig for years and when I got the BMPCC4K its was a no brainer to get the brand I trusted. Got another camera coming on the way soon and will alway try to stick with great gear and small rigs makes great gear.
Show for you like this post.
Question & Answer
Question :
Would this fit on a Ronin-M?
Answer :
Hello,
So sorry that this cage couldn't fit on a Ronin-M.
Regards
Lacey
SmallRig Customer Service
Question :
Can i screw this directly into a tripod or do i need to by the base plate mount? if so, what would be the best universal option? no slide rails needed
Answer :
If the video head on your tripod has a quick release plate, you shouldn't need anything additional unless your lens is on the heavier side and requires extra support.
Question :
can i use on a zhiyun weebil s?
Answer :
You can, you might have to counter balance one arm to avoid micro hitters depending on lens configuration.
Question :
will this fit the 6k?
Answer :
Yes, it is a dedicated full cage for BMPCC 4K and 6K.
Regards
Lacey
SmallRig Customer Service
Question :
Is this the monitor cage used in the movie Tenet?
Answer :
I also saw the SmallRig product in Tenet, but the SmallRig 2012 has sold out. It is SmallRig BMPCC series. This product 2203B is a new product of the same series. I bought many SmallRig products; they not only have cages, but also handles, monitor mounts and other products, which are all very useful
Question :
Does this also fit the original blackmagic pocket cinema camera?
Answer :
No, it won't. The two cameras have completely different bodies. The newer BMPCC4K/6K are dramatically larger than the earlier BMPCC.
Question :
Compatible with swx powerbase edge?
Answer :
Yup, you can screw the powebase edge onto the bottom or where you deem fit.
Question :
Does the bottom of the cage has built in arca Swiss plate?
Answer :
No, this does not have a built-in arca Swiss plate. However, it does allows to screw one in.
Question :
What is included with the cage?
Answer :
It's just the cage. There isn't anything else with it.
Question :
Will this cage fit on a moza air 2 with a bmpcc 4K?
Answer :
Yes but you may have to mount it on the plate off center.
Do you already have the Moza Air 2? I’ve been having problems with mine after a year FYI.
Comments
Post a Comment